There is this amazing company that provides a software application that enables you to design your own front panels. Not only do they give you the software but they make it for you too! Amazing! Ive spent the last 6 hours fiddling with this front panel design. Measurements are made to fit the S800 PCB's mounted pots. Just remember! If you use this layout you will need to replaced the switch on the far right of the PCB with a panel mounted toggle switch.
This was designed by myself, but I don't mind if you use it. Or share it for that matter.
Download the Front-panel Express file below.
Download
Get the software to view and edit it here
http://www.frontpanelexpress.com/
Bypass switch wiring. (Thanks to Matt Allison at Ashton Audio for this.)
Hello, thank you so much for designing the front panel. I ordered one through front panel express, everything is great but there's one problem I hope you can help with. It seems like the cutout for the power switch is an unusual size, is there a specific part you made the cut out for? All the switches I've looked at are a little to tall and narrow or a little to short and wide.
ReplyDeleteThanks!
-Nate